Matters needing attention when using the hose automatic labeling machine

The purpose of our use of mechanical equipment is to improve our production or reduce our labor force, but when using it, we should pay attention to it. If we do not pay attention to some details, it is easy to cause certain troubles. Automatic labeling machine is one of them. One, then what should be paid attention to when using the hose automatic labeling machine?

First, the most important thing in the labeling of the hose is the cooperation between the inner plug and the hose. If the fit is too loose, the labeling coincidence is not good, and if it is too tight, it is easy to generate air bubbles.

Second, the operating environment is also very important. If the site is not clean enough and the dust particles exceed the standard, it will lead to “slag inclusion” in the labeling. There are stricter hygiene requirements because the inner plug is in contact with the inner wall of the hose during labeling, so under normal circumstances, the material of the inner plug is made of highly polished, easy to clean and regularly disinfected.
Third, the storage of the inner plug: different hoses should be matched with different inner plugs. The inner plug that is not used temporarily should be stored on a fixed bracket, and it should be stored vertically with the ground to avoid the deformation of the inner plug affecting the labeling accuracy.

Fourth, automatic feeding: The hose labeling machine is equipped with an automatic feeding bin to realize the automatic feeding of the hose labeling. During the production process, pay attention to the mutual friction of the hoses and not scratch the surface. Of course, during the feeding process It is also necessary to control the hose not to be “horizontal” to avoid material blockage.

Fifth, control of air bubbles: hose label materials are generally soft and thin, because this type of label emphasizes “following”, that is, the label should deform with the deformation of the hose. Therefore, during the labeling process, it is necessary to ensure the “line contact” between the label and the hose. The line contact labeling from head to tail is the most important means of not generating air bubbles.

If you want to know more about the matters needing attention when using the hose automatic labeling machine, I hope it can help you. If you want to know more about the automatic labeling machine, you can click the website page to browse  https://www.ublpacking.com/labeling-machine/ !