After the continuous improvement of automation technology, many machines have become automatic, such as automatic labeling machines, which have now been widely used, and have been used in the production of products in many industries, in order to effectively improve The use effect of the labeling machine requires timely improvement of the labeling machine system. Let’s take a look at it together:
At this stage, beef tendon pads have been widely used in automatic labeling machines, which have the following advantages. First, according to the beef tendon label, it can have good resilience, and the maximum limit is reduced when the drum label is taken out. Second, the beef tendon pad has a good friction coefficient, and the appearance is relatively lubricated, so it can be smoothly selected. Third, the equipment wears slowly and can be used steadily for a long time. On the premise of the original three rows of brushes for the trademark machine, two more rows of brushes are added to improve the tightness of the brushes and ensure that the labeling can be more smoothly performed. Before back labeling, the oblique brush needs to be installed properly, with an angle of about 70°. One is to properly join the sponge roller in the labeling machine, and then to change the bubbling, warping, and wrinkles in the center of the labeling machine in time. The second is that the sponge roller is relatively soft, not only will not damage the bottle, but also will not wear the trademark. The third is to properly set up a brush in front of the sponge roller to brush the back label. The sponge roller presses the back label again to ensure that it becomes more smooth.
How to ensure the normal operation of the automatic labeling machine: 1. If the labeling machine fails, it must be inspected and repaired by the manufacturer’s professional or authorized personnel; 2. There must be regular maintenance and records; 3. There should be strict safety operation guidelines; 4. Before starting the automatic labeling machine, check the corresponding power and air source, and make sure that there are no obstacles entering the working range of the labeling machine; 5. During operation, keep your hands or hair away from moving parts to avoid pinching 6. When the labeling machine is running, it is forbidden to have any flammable, explosive or corrosive objects close to the working range of the labeling machine; 7. Any disassembly of the labeling machine’s parts, please cut off the power; 8. Labeling machine cleaning and maintenance Please pay attention to the waterproof and moisture-proof treatment of electrical components; 9. If the labeling machine will not be used for a long time, please unplug the power plug or cut off the incoming power supply.
The introduction on how to improve the use effect of the automatic labeling machine in terms of technology is here. For details, please consult this site:
https://www.ublpacking.com/
Post time: May-16-2022